Electrician prices in Albuquerque, NM
| Project | Time | Typical cost | Range |
|---|
| Standard service call (diagnosis + minor repair) |
1–2 hours |
$163 |
$134 – $196 |
| Add a new outlet (15–20 amp, dedicated) |
1–3 hours |
$188 |
$154 – $226 |
| Ceiling fan install (existing wiring) |
1–2 hours |
$179 |
$147 – $214 |
| Panel upgrade (100A → 200A, includes permit) |
1 day |
$1,810 |
$1,484 – $2,172 |
| Level 2 EV charger install (50A circuit, hardwired) |
4–6 hours |
$717 |
$588 – $860 |
| Single room rewire (avg ~3 outlets + 1 fixture) |
1 day |
$672 |
$551 – $807 |
| Whole-house rewire (1500–2000 sq ft) |
5–10 days |
$6,230 |
$5,109 – $7,476 |
Local rate = BLS national mean × 2.4 markup × (NM COL 94.0/100). Materials adjusted by the same factor.
What a electrician in Albuquerque actually does
A licensed electrician handles anything attached to the breaker panel or carrying line voltage (120V/240V). A standard residential service call begins with the panel: the electrician verifies the main breaker rating, looks for double-tapped breakers, checks for AFCI/GFCI compliance in the right rooms, and tests for proper grounding at the service drop. Outlet, switch, and fixture work is straightforward. Panel upgrades, sub-panel adds, EV-charger installs, and whole-house rewires require a permit, a load calculation (NEC Article 220), and an inspection by the local AHJ before the panel is energized.
Questions to ask before you hire in NM
- What is your master or journeyman license number, and is it active in this state?
- Will the work be done by a licensed electrician or by a helper with the licensee on call?
- Are you pulling the permit and scheduling inspection?
- Does the quote include any required panel-load calculations or breaker upgrades?
- What's the warranty on labor — and on the equipment you're installing?
- Are AFCI and GFCI breakers included where code now requires them?
Cash-only quotes, "I can do it without a permit so it's cheaper," and any pressure to upsize a panel without a written load calculation explaining why.
5 licensed electricians in Albuquerque
Collins Voltage
📍 2681 Park Ct, Albuquerque, NM 87102
★ 3.8 / 5 · 147 reviews · 7 years in business
✓ Licensed ✓ Insured BBB A- 24/7 Emergency 7 yrs
Specialties: Outlet install, Smoke detector, Surge protection, Ceiling fan, Whole-house rewire
Scott Electrical
📍 273 Lincoln St, Albuquerque, NM 87101
★ 4.2 / 5 · 298 reviews · 24 years in business
✓ Licensed ✓ Insured BBB A- 24/7 Emergency 24 yrs
Specialties: Knob-and-tube replacement, Surge protection, Whole-house rewire
Albuquerque Electrical
📍 7995 Forest Pl, Albuquerque, NM 87104
★ 4.2 / 5 · 247 reviews · 11 years in business
✓ Licensed ✓ Insured 24/7 Emergency 11 yrs
Specialties: Ceiling fan, Knob-and-tube replacement, Panel upgrade
Albuquerque Current
📍 9091 Aspen Ct, Albuquerque, NM 87102
★ 3.8 / 5 · 275 reviews · 30 years in business
✓ Licensed ✓ Insured BBB A 30 yrs
Specialties: Knob-and-tube replacement, Generator install, Panel upgrade, EV charger install, Recessed lighting
Trusted Amp Pros
📍 444 Beach Ln, Albuquerque, NM 87101
★ 4.2 / 5 · 21 reviews · 5 years in business
✓ Licensed ✓ Insured BBB A 24/7 Emergency 5 yrs
Specialties: Recessed lighting, Whole-house rewire, Ceiling fan, EV charger install, Knob-and-tube replacement
Looking for a specific ZIP?
Seasonal electrical checklist for Albuquerque homeowners
Spring
- Test every GFCI outlet (kitchen, baths, garage, exterior) using the on-device test/reset button.
- Test smoke and CO detectors; replace batteries on any unit older than 10 years.
- Inspect outdoor lighting and replace bulbs and weatherproof gaskets that have degraded over winter.
- Walk the panel: look for rust, scorch marks, or warm breakers — any of these is a service call.
Summer
- Inspect the exterior service drop and the meter base for storm damage; never touch the wires yourself.
- If you run multiple high-draw appliances (window AC, EV charger, pool pump), have an electrician verify your panel can handle the simultaneous load.
Fall
- Test the whole-home surge protector (or have one installed before winter storms).
- Inspect generator transfer switch and run the generator under load for 20 minutes.
- Replace outdoor incandescent bulbs with LEDs before holiday-light season.