Average House Painter Cost in Boston, MA

House Painter prices in Boston, MA

Project	Time	Typical cost	Range
Single room paint (10×12, walls only, 2 coats)	1 day	$765	$627 – $918
Whole interior repaint (1700 sq ft, walls + ceilings)	4–6 days	$6,569	$5,386 – $7,882
Exterior repaint (1700 sq ft, prep + 2 coats)	4–7 days	$7,659	$6,281 – $9,191
Kitchen cabinet refinish (sand, prime, sprayed enamel)	3–5 days	$2,973	$2,438 – $3,567
All trim + 6 interior doors (whole house)	2 days	$1,875	$1,538 – $2,250
Ceiling paint refresh (avg 1500 sq ft)	1 day	$1,068	$876 – $1,282
Deck stripping + restain (300 sq ft)	2 days	$1,299	$1,065 – $1,559
Pre-paint pressure wash (whole exterior)	half day	$389	$319 – $467
Wallpaper removal + skim coat (one room)	1–2 days	$864	$709 – $1,037

Local rate = BLS national mean × 2.4 markup × (MA COL 146.5/100). Materials adjusted by the same factor.

What a house painter in Boston actually does

A pro painter's job is mostly prep, not paint: washing, sanding glossy/peeling areas, scraping, patching nail holes and drywall damage, caulking trim seams, masking floors and fixtures, priming bare or stain-prone areas, then finally rolling, brushing, or spraying two coats of finish. On exteriors, that prep includes a full pressure wash, scraping any peeling sections to bare wood, spot-priming with a bonding primer, and re-caulking every trim seam — typical exterior jobs are 3–5 days for a 1,700 sq ft home. The most common scope inflation is "spraying" cabinets without sanding/de-glossing first; it looks great for six months and then peels. Lead-paint disclosures are required for any pre-1978 home (EPA RRP rule) and a properly-trained painter will follow a containment protocol.

Questions to ask before you hire in MA

How many coats of finish, and is the primer included or extra?
What brand and product line are you using? (Sherwin-Williams Emerald, Benjamin Moore Aura, and Behr Ultra are all premium tiers.)
Are you EPA RRP-certified for lead-paint work? (Required for pre-1978 homes.)
How will you prep glossy or peeling surfaces — sanding, de-glossing, bonding primer?
What's included in the prep (caulking, drywall patches, masking, removing outlet covers)?
What's the workmanship warranty, and what triggers a re-do (peeling, cracking, drips)?

A bid that's 40% lower than competitors almost always means thinned paint, one coat instead of two, or skipping primer on patched areas — and it shows within a year.

Looking for a specific ZIP?

ZIP 02203 House Painters near 02203 ZIP 02133 House Painters near 02133 ZIP 02113 House Painters near 02113

Seasonal painting checklist for Boston homeowners

Spring

Walk the exterior and mark any peeling, blistering, or chalking paint — these areas need scraping, sanding, and spot-priming before any topcoat goes on.
Check south- and west-facing walls first; they take 2–3× the UV exposure of north-facing walls and fail first.
Inspect trim caulk lines and re-caulk any cracked or pulled-away beads with a paintable acrylic-latex caulk before painting season starts.
Plan whole-house exterior repaints for late spring through early fall — surface temps must be 50–85°F with low humidity for proper film formation.

Fall

Touch up exterior trim and any spots where summer UV faded the topcoat — this extends the life of the coating system by 2–3 years.
Now is the best window for interior repaints (open windows for ventilation without summer humidity messing with cure times).
Stain or reseal wood decks every 2–3 years — fall is the safest window since deck wood needs 48 hours of dry weather after a clean.

Winter

Interior repaints are easiest in winter; just keep room temps above 60°F for 24 hours after each coat to allow proper film formation.
Use a low-VOC paint (Greenguard Gold-certified) for any room that will be sealed up overnight after painting; fumes accumulate fast in heated, closed homes.