★ Trusted by 84,000+ homeowners — verified contractor reviews Need a pro now? 1-888-555-FIXR
FFixMyHomePro Find Pros Near Me

Home › Cities › Denton, TX › HVAC

❄️ HVAC · Denton

Average HVAC Technician Cost in Denton, TX

A hvac technician in Denton charges roughly $67/hour — driven by the BLS OEWS national mean hourly wage of $30.30 for SOC 49-9021, the TX cost-of-living index of 92.7, and the standard 2.4× contractor markup. Below: project-by-project pricing, then 3 licensed local pros.

HVAC Technician prices in Denton, TX

ProjectTimeTypical costRange
Diagnostic service call (no parts) 45–90 min $67 $55 – $81
Annual AC or furnace tune-up 60–90 min $124 $102 – $149
AC repair (capacitor / contactor / minor part) 1–3 hours $302 $247 – $362
Refrigerant recharge (R-410A, residential) 1–2 hours $361 $296 – $433
Smart thermostat install 1 hour $268 $220 – $322
Gas furnace replacement (80% AFUE, 80k BTU) 1 day $2,764 $2,267 – $3,317
Heat pump replacement (3-ton, 16 SEER) 1–2 days $6,320 $5,183 – $7,584
Mini-split install (single zone, 12k BTU) 1 day $2,301 $1,886 – $2,761
Whole-home duct cleaning 3–5 hours $325 $267 – $390

Local rate = BLS national mean × 2.4 markup × (TX COL 92.7/100). Materials adjusted by the same factor.

What a hvac technician in Denton actually does

A residential HVAC technician services, repairs, and installs forced-air furnaces, central AC, heat pumps, mini-splits, and ductwork. A diagnostic visit typically includes static-pressure measurement, refrigerant pressure (for cooling systems), temperature differential between supply and return, electrical-component testing (capacitor microfarad, contactor pull-in, transformer voltage), and ignition or burner inspection on heating equipment. Installations require Manual J / Manual D / Manual S calculations to size the equipment correctly — beware any installer who skips these and recommends "the same size you have now."

Questions to ask before you hire in TX

  1. Are you NATE-certified, and is your company licensed and insured in this state?
  2. For a replacement: did you run a Manual J load calculation, and can I see it in writing?
  3. What SEER2/HSPF2 is the equipment you're quoting, and what's the AHRI match number?
  4. Does the quote include duct sealing, thermostat, condensate pump (if needed), and permit?
  5. What's the labor warranty, and is the manufacturer warranty registered in my name?
  6. Will you provide commissioning data (subcooling/superheat, static pressure) at completion?
"Same-size replacement" without a load calc, refrigerant-only quotes that don't address the leak, and any installer who pushes the largest unit without explaining why.

3 licensed hvac technicians in Denton

Lone Star Cool Breeze

📍 7746 Garden Ct, Denton, TX 76201
★ 4.0 / 5 · 31 reviews · 32 years in business
✓ Licensed ✓ Insured BBB A 24/7 Emergency 32 yrs
Specialties: Heat pump replacement, Duct cleaning, Air-quality test
Free Quote 📞 (944) 623-6441

Denton Heating & Cooling

📍 4101 Walnut Dr, Denton, TX 76203
★ 4.3 / 5 · 360 reviews · 29 years in business
✓ Licensed ✓ Insured BBB A- 29 yrs
Specialties: Mini-split install, AC repair, Annual tune-up, Air-quality test, Refrigerant recharge
Free Quote 📞 (308) 242-6005

Denton Cool Breeze

📍 7811 Madison Ave, Denton, TX 76205
★ 4.6 / 5 · 300 reviews · 7 years in business
✓ Licensed ✓ Insured BBB A 24/7 Emergency 7 yrs
Specialties: Air-quality test, Heat pump replacement, Boiler service
Free Quote 📞 (230) 882-0223

Looking for a specific ZIP?

ZIP 76201 HVAC Technicians near 76201 ZIP 76203 HVAC Technicians near 76203 ZIP 76205 HVAC Technicians near 76205

Seasonal hvac checklist for Denton homeowners

Spring

  • Schedule an AC tune-up before May; pros are 30–40% cheaper in shoulder season than during the first July heatwave.
  • Replace HVAC filters (every 30–90 days depending on type and pets).
  • Hose down the outdoor condenser coil and clear at least 2 feet of vegetation around it.
  • Test the AC by setting it to 5°F below indoor temperature; it should kick on within 30 seconds and the supply registers should blow noticeably cool air within 5 minutes.

Fall

  • Schedule a furnace or heat-pump tune-up before October.
  • Replace HVAC filters again going into heating season.
  • Clear leaves from around the outdoor condenser/heat pump and cover the top only (never wrap the sides).
  • Test CO detectors near gas-burning appliances; replace batteries.
  • Run the furnace for 10 minutes before the first cold snap; address any odd smells, banging, or short-cycling now.

Winter

  • Keep furniture and rugs at least 6 inches off supply registers and return-air grilles.
  • Inspect attic insulation; less than R-30 is the #1 reason heating bills run high in older homes.
  • Defrost outdoor heat-pump coils once every 2–3 weeks during sustained cold.
📞 Get a Free Local Estimate →