★ Trusted by 84,000+ homeowners — verified contractor reviews Need a pro now? 1-888-555-FIXR

HomeCitiesGarland, TX › HVAC

❄️ HVAC · Garland

Average HVAC Technician Cost in Garland, TX

A hvac technician in Garland charges roughly $67/hour — driven by the BLS OEWS national mean hourly wage of $30.30 for SOC 49-9021, the TX cost-of-living index of 92.7, and the standard 2.4× contractor markup. Below: project-by-project pricing, then 5 licensed local pros.

HVAC Technician prices in Garland, TX

ProjectTimeTypical costRange
Diagnostic service call (no parts) 45–90 min $67 $55 – $81
Annual AC or furnace tune-up 60–90 min $124 $102 – $149
AC repair (capacitor / contactor / minor part) 1–3 hours $302 $247 – $362
Refrigerant recharge (R-410A, residential) 1–2 hours $361 $296 – $433
Smart thermostat install 1 hour $268 $220 – $322
Gas furnace replacement (80% AFUE, 80k BTU) 1 day $2,764 $2,267 – $3,317
Heat pump replacement (3-ton, 16 SEER) 1–2 days $6,320 $5,183 – $7,584
Mini-split install (single zone, 12k BTU) 1 day $2,301 $1,886 – $2,761
Whole-home duct cleaning 3–5 hours $325 $267 – $390

Local rate = BLS national mean × 2.4 markup × (TX COL 92.7/100). Materials adjusted by the same factor.

What a hvac technician in Garland actually does

A residential HVAC technician services, repairs, and installs forced-air furnaces, central AC, heat pumps, mini-splits, and ductwork. A diagnostic visit typically includes static-pressure measurement, refrigerant pressure (for cooling systems), temperature differential between supply and return, electrical-component testing (capacitor microfarad, contactor pull-in, transformer voltage), and ignition or burner inspection on heating equipment. Installations require Manual J / Manual D / Manual S calculations to size the equipment correctly — beware any installer who skips these and recommends "the same size you have now."

Questions to ask before you hire in TX

  1. Are you NATE-certified, and is your company licensed and insured in this state?
  2. For a replacement: did you run a Manual J load calculation, and can I see it in writing?
  3. What SEER2/HSPF2 is the equipment you're quoting, and what's the AHRI match number?
  4. Does the quote include duct sealing, thermostat, condensate pump (if needed), and permit?
  5. What's the labor warranty, and is the manufacturer warranty registered in my name?
  6. Will you provide commissioning data (subcooling/superheat, static pressure) at completion?
"Same-size replacement" without a load calc, refrigerant-only quotes that don't address the leak, and any installer who pushes the largest unit without explaining why.

5 licensed hvac technicians in Garland

Atlantic Mechanical

📍 1057 Maple Ln, Garland, TX 75040
★ 4.9 / 5 · 197 reviews · 34 years in business
✓ Licensed ✓ Insured BBB A 24/7 Emergency 34 yrs
Specialties: AC repair, Boiler service, Mini-split install, Air-quality test, Furnace install

Veteran Air Pros

📍 7573 Meadow Dr, Garland, TX 75041
★ 4.2 / 5 · 314 reviews · 32 years in business
✓ Licensed ✓ Insured BBB A+ 24/7 Emergency 32 yrs
Specialties: Air-quality test, Thermostat install, Furnace install, AC repair

Five-Star Temperature

📍 5076 Sunset Ter, Garland, TX 75042
★ 4.9 / 5 · 373 reviews · 10 years in business
✓ Licensed ✓ Insured BBB A- 24/7 Emergency 10 yrs
Specialties: Annual tune-up, Air-quality test, Duct cleaning, Refrigerant recharge

Garland Climate

📍 8404 Birch Pl, Garland, TX 75040
★ 3.7 / 5 · 180 reviews · 21 years in business
✓ Licensed ✓ Insured BBB A+ 24/7 Emergency 21 yrs
Specialties: Heat pump replacement, Air-quality test, Refrigerant recharge

Nelson Cool Breeze

📍 3462 River Pl, Garland, TX 75041
★ 4.6 / 5 · 347 reviews · 34 years in business
✓ Licensed ✓ Insured 34 yrs
Specialties: Annual tune-up, Refrigerant recharge, Boiler service

Looking for a specific ZIP?

Seasonal hvac checklist for Garland homeowners

Spring

  • Schedule an AC tune-up before May; pros are 30–40% cheaper in shoulder season than during the first July heatwave.
  • Replace HVAC filters (every 30–90 days depending on type and pets).
  • Hose down the outdoor condenser coil and clear at least 2 feet of vegetation around it.
  • Test the AC by setting it to 5°F below indoor temperature; it should kick on within 30 seconds and the supply registers should blow noticeably cool air within 5 minutes.

Fall

  • Schedule a furnace or heat-pump tune-up before October.
  • Replace HVAC filters again going into heating season.
  • Clear leaves from around the outdoor condenser/heat pump and cover the top only (never wrap the sides).
  • Test CO detectors near gas-burning appliances; replace batteries.
  • Run the furnace for 10 minutes before the first cold snap; address any odd smells, banging, or short-cycling now.

Winter

  • Keep furniture and rugs at least 6 inches off supply registers and return-air grilles.
  • Inspect attic insulation; less than R-30 is the #1 reason heating bills run high in older homes.
  • Defrost outdoor heat-pump coils once every 2–3 weeks during sustained cold.
📞 Get a Free Local Estimate →