Electrician prices in Milwaukee, WI
| Project | Time | Typical cost | Range |
|---|
| Standard service call (diagnosis + minor repair) |
1–2 hours |
$165 |
$136 – $198 |
| Add a new outlet (15–20 amp, dedicated) |
1–3 hours |
$190 |
$156 – $228 |
| Ceiling fan install (existing wiring) |
1–2 hours |
$181 |
$148 – $217 |
| Panel upgrade (100A → 200A, includes permit) |
1 day |
$1,831 |
$1,502 – $2,197 |
| Level 2 EV charger install (50A circuit, hardwired) |
4–6 hours |
$725 |
$595 – $871 |
| Single room rewire (avg ~3 outlets + 1 fixture) |
1 day |
$680 |
$558 – $816 |
| Whole-house rewire (1500–2000 sq ft) |
5–10 days |
$6,303 |
$5,169 – $7,564 |
Local rate = BLS national mean × 2.4 markup × (WI COL 95.1/100). Materials adjusted by the same factor.
What a electrician in Milwaukee actually does
A licensed electrician handles anything attached to the breaker panel or carrying line voltage (120V/240V). A standard residential service call begins with the panel: the electrician verifies the main breaker rating, looks for double-tapped breakers, checks for AFCI/GFCI compliance in the right rooms, and tests for proper grounding at the service drop. Outlet, switch, and fixture work is straightforward. Panel upgrades, sub-panel adds, EV-charger installs, and whole-house rewires require a permit, a load calculation (NEC Article 220), and an inspection by the local AHJ before the panel is energized.
Questions to ask before you hire in WI
- What is your master or journeyman license number, and is it active in this state?
- Will the work be done by a licensed electrician or by a helper with the licensee on call?
- Are you pulling the permit and scheduling inspection?
- Does the quote include any required panel-load calculations or breaker upgrades?
- What's the warranty on labor — and on the equipment you're installing?
- Are AFCI and GFCI breakers included where code now requires them?
Cash-only quotes, "I can do it without a permit so it's cheaper," and any pressure to upsize a panel without a written load calculation explaining why.
5 licensed electricians in Milwaukee
Milwaukee Voltage
📍 6168 Madison Ct, Milwaukee, WI 53203
★ 4.7 / 5 · 97 reviews · 26 years in business
✓ Licensed ✓ Insured BBB A 26 yrs
Specialties: Generator install, Surge protection, Knob-and-tube replacement, Whole-house rewire, EV charger install
Veteran Voltage
📍 5500 Bay Way, Milwaukee, WI 53202
★ 4.0 / 5 · 399 reviews · 28 years in business
✓ Licensed ✓ Insured BBB A- 28 yrs
Specialties: Surge protection, Panel upgrade, Smoke detector, Generator install, Outlet install
Capitol Electrical
📍 8251 Oak Ave, Milwaukee, WI 53233
★ 4.8 / 5 · 256 reviews · 10 years in business
✓ Licensed ✓ Insured BBB A 10 yrs
Specialties: Outlet install, EV charger install, Ceiling fan, Recessed lighting, Surge protection
Milwaukee Sparks
📍 7784 River Ln, Milwaukee, WI 53203
★ 4.6 / 5 · 324 reviews · 18 years in business
✓ Licensed ✓ Insured BBB A+ 18 yrs
Specialties: Knob-and-tube replacement, Surge protection, EV charger install
Martinez Electric
📍 7303 Cherry Pl, Milwaukee, WI 53202
★ 4.8 / 5 · 321 reviews · 23 years in business
✓ Licensed ✓ Insured BBB A 24/7 Emergency 23 yrs
Specialties: Ceiling fan, Recessed lighting, Smoke detector, Generator install, Panel upgrade
Looking for a specific ZIP?
Seasonal electrical checklist for Milwaukee homeowners
Spring
- Test every GFCI outlet (kitchen, baths, garage, exterior) using the on-device test/reset button.
- Test smoke and CO detectors; replace batteries on any unit older than 10 years.
- Inspect outdoor lighting and replace bulbs and weatherproof gaskets that have degraded over winter.
- Walk the panel: look for rust, scorch marks, or warm breakers — any of these is a service call.
Summer
- Inspect the exterior service drop and the meter base for storm damage; never touch the wires yourself.
- If you run multiple high-draw appliances (window AC, EV charger, pool pump), have an electrician verify your panel can handle the simultaneous load.
Fall
- Test the whole-home surge protector (or have one installed before winter storms).
- Inspect generator transfer switch and run the generator under load for 20 minutes.
- Replace outdoor incandescent bulbs with LEDs before holiday-light season.