★ Trusted by 84,000+ homeowners — verified contractor reviews Need a pro now? 1-888-555-FIXR

HomeCost GuidesElectrician Cost › Shreveport, LA

⚡ Cost Guide · Shreveport, LA

Average Electrician Cost in Shreveport, LA (2026)

A electrician in Shreveport charges $75/hour for a standard service call — that's 10% below the US median of $83/hour. The differential reflects the LA cost-of-living composite of 91.0 (US average = 100) applied to BLS OEWS national mean wage data for SOC 47-2111.

Electrician project costs in Shreveport, LA

ProjectTimeTypical costRange
Standard service call (diagnosis + minor repair) 1–2 hours $158 $130 – $190
Add a new outlet (15–20 amp, dedicated) 1–3 hours $182 $149 – $219
Ceiling fan install (existing wiring) 1–2 hours $173 $142 – $208
Panel upgrade (100A → 200A, includes permit) 1 day $1,752 $1,437 – $2,103
Level 2 EV charger install (50A circuit, hardwired) 4–6 hours $694 $569 – $833
Single room rewire (avg ~3 outlets + 1 fixture) 1 day $651 $534 – $781
Whole-house rewire (1500–2000 sq ft) 5–10 days $6,031 $4,946 – $7,238

Sources: BLS OEWS May 2024 (SOC 47-2111), MERIC State Cost of Living Index 91.0 for LA, NAHB Construction Cost Survey 2024.

How Shreveport compares

At an effective contractor rate of $75/hour, Shreveport sits meaningfully below the national median for electrician work. Homeowners here will see lower-than-average prices on labor-intensive jobs (re-pipes, panel upgrades, full system replacements) where labor is the bulk of the cost. Materials-heavy jobs (water-heater swaps, furnace replacements, large appliance installs) will track somewhat below the national figure because regional materials inflation in LA runs about 9% below the US benchmark.

What the work involves

A licensed electrician handles anything attached to the breaker panel or carrying line voltage (120V/240V). A standard residential service call begins with the panel: the electrician verifies the main breaker rating, looks for double-tapped breakers, checks for AFCI/GFCI compliance in the right rooms, and tests for proper grounding at the service drop. Outlet, switch, and fixture work is straightforward. Panel upgrades, sub-panel adds, EV-charger installs, and whole-house rewires require a permit, a load calculation (NEC Article 220), and an inspection by the local AHJ before the panel is energized.

Six questions to ask any electrician in LA

  1. What is your master or journeyman license number, and is it active in this state?
  2. Will the work be done by a licensed electrician or by a helper with the licensee on call?
  3. Are you pulling the permit and scheduling inspection?
  4. Does the quote include any required panel-load calculations or breaker upgrades?
  5. What's the warranty on labor — and on the equipment you're installing?
  6. Are AFCI and GFCI breakers included where code now requires them?
Cash-only quotes, "I can do it without a permit so it's cheaper," and any pressure to upsize a panel without a written load calculation explaining why.

Featured electricians in Shreveport

Hernandez Voltage

📍 105 Washington Pkwy, Shreveport, LA 71101
★ 4.7 / 5 · 293 reviews · 10 yrs
✓ Licensed

Eagle Electrical

📍 2253 Spring Ct, Shreveport, LA 71104
★ 3.7 / 5 · 278 reviews · 24 yrs
✓ Licensed 24/7

See all Electricians in Shreveport →

By ZIP code in Shreveport

Seasonal electrical checklist

Spring

  • Test every GFCI outlet (kitchen, baths, garage, exterior) using the on-device test/reset button.
  • Test smoke and CO detectors; replace batteries on any unit older than 10 years.
  • Inspect outdoor lighting and replace bulbs and weatherproof gaskets that have degraded over winter.
  • Walk the panel: look for rust, scorch marks, or warm breakers — any of these is a service call.

Summer

  • Inspect the exterior service drop and the meter base for storm damage; never touch the wires yourself.
  • If you run multiple high-draw appliances (window AC, EV charger, pool pump), have an electrician verify your panel can handle the simultaneous load.

Fall

  • Test the whole-home surge protector (or have one installed before winter storms).
  • Inspect generator transfer switch and run the generator under load for 20 minutes.
  • Replace outdoor incandescent bulbs with LEDs before holiday-light season.
📞 Get a Free Local Estimate →