★ Trusted by 84,000+ homeowners — verified contractor reviews Need a pro now? 1-888-555-FIXR
FFixMyHomePro Find Pros Near Me

Home › Cost Guides › Handyman Cost › Killeen, TX

🔨 Cost Guide · Killeen, TX

Average Handyman Cost in Killeen, TX (2026)

A handyman in Killeen charges $51/hour for a standard service call — that's 7% below the US median of $55/hour. The differential reflects the TX cost-of-living composite of 92.7 (US average = 100) applied to BLS OEWS national mean wage data for SOC 47-2061.

Handyman project costs in Killeen, TX

ProjectTimeTypical costRange
Standard hourly rate (1-person crew) per hour $51 $42 – $61
TV mount install (drywall, fixed mount) 60–90 min $100 $82 – $120
Drywall patch (one fist-sized hole) 2 hours + cure $130 $107 – $156
Interior door rehang or hardware replace 1–2 hours $109 $89 – $131
Light fixture or ceiling-fan swap (existing wiring) 1–2 hours $95 $78 – $114
Flat-pack furniture assembly (avg piece) 1.5–3 hours $102 $84 – $122
Single room repaint (10×12, 2 coats) 1 day $510 $418 – $612
Driveway + walkway pressure wash 2–4 hours $176 $145 – $212
Whole-house caulk + seal refresh 4–6 hours $246 $202 – $295

Sources: BLS OEWS May 2024 (SOC 47-2061), MERIC State Cost of Living Index 92.7 for TX, NAHB Construction Cost Survey 2024.

How Killeen compares

At an effective contractor rate of $51/hour, Killeen sits right around the national median for handyman work. Homeowners here will see lower-than-average prices on labor-intensive jobs (re-pipes, panel upgrades, full system replacements) where labor is the bulk of the cost. Materials-heavy jobs (water-heater swaps, furnace replacements, large appliance installs) will track somewhat below the national figure because regional materials inflation in TX runs about 7% below the US benchmark.

What the work involves

A handyman handles small to mid-size jobs that don't cross into licensed-trade territory: drywall repair and patching, painting, fixture replacement (where existing wiring is in place), light carpentry, furniture assembly, door rehang, weatherstripping, caulking, hardware installs, mounting heavy items into studs, pressure washing, and basic deck or fence repair. State rules vary on the dollar threshold above which a general contractor license is required — in California it's $500 (labor + materials per project), in Texas there is no statewide license but cities can require permits, and in Florida it's $1,000.

Six questions to ask any handyman in TX

  1. For my state, is this job above the threshold that requires a contractor license?
  2. Do you carry liability insurance? (Even small jobs can do five-figure damage.)
  3. How do you price — hourly with a minimum, or flat per task?
  4. Do you bring your own materials or do I supply them?
  5. What's your guarantee if a repair fails within a few weeks?
  6. How are change-orders handled if the job opens up something bigger?
A "handyman" willing to do major plumbing, electrical, or HVAC work without a license — that's how houses end up with insurance-disqualifying defects.

Featured handymans in Killeen

See all Handymans in Killeen →

By ZIP code in Killeen

ZIP 76541 Handyman cost in 76541 ZIP 76543 Handyman cost in 76543 ZIP 76548 Handyman cost in 76548

Seasonal handyman checklist

Spring

  • Inspect the roof from the ground with binoculars: missing shingles, lifted flashing, or sagging gutters all need attention before storm season.
  • Clean gutters and downspouts; verify water exits at least 4 feet from the foundation.
  • Re-caulk exterior windows and doors where the old bead has cracked or pulled away.
  • Pressure wash siding, decks, and walkways; reseal wood decks every 2–3 years.
  • Touch-up exterior paint before summer UV intensifies.

Fall

  • Clean gutters again after leaf-drop; clogged gutters in winter cause ice dams and interior damage.
  • Caulk and weatherstrip doors and windows; the average home loses 30% of conditioned air through gaps.
  • Drain and store outdoor hoses; cover hose bibs.
  • Inspect the chimney and have it swept if you burn wood; clear creosote is the leading cause of chimney fires.
  • Stage firewood at least 30 feet from the house.

Winter

  • Reverse ceiling fans to clockwise (low) to push warm air down.
  • Test all door hardware and locks now; lubrication issues are easier to fix before a sub-freezing morning.
📞 Get a Free Local Estimate →