Home › Cost Guides › Roofer Cost › Greensboro, NC
🏠 Cost Guide · Greensboro, NCA roofer in Greensboro charges $61/hour for a standard service call — that's 3% below the US median of $63/hour. The differential reflects the NC cost-of-living composite of 95.7 (US average = 100) applied to BLS OEWS national mean wage data for SOC 47-2181.
| Project | Time | Typical cost | Range |
|---|---|---|---|
| Roof inspection + written report | 1–2 hours | $121 | $99 – $145 |
| Single leak repair (small area, replace ~10 shingles) | half day | $357 | $293 – $428 |
| Shingle replacement (storm spot repair, ~1 square) | half day | $571 | $468 – $685 |
| Step-flashing replacement around chimney or skylight | 1 day | $574 | $471 – $689 |
| Seamless aluminum gutter install (150 ln ft) | 1 day | $1,658 | $1,360 – $1,990 |
| Tear-off + asphalt re-roof (1700 sq ft, mid-grade) | 2–3 days | $10,140 | $8,315 – $12,168 |
| Standing-seam metal roof (1700 sq ft) | 3–5 days | $17,763 | $14,566 – $21,316 |
| Synthetic underlayment + ice-shield refresh | 1 day | $1,661 | $1,362 – $1,993 |
| Skylight replacement (one fixed unit) | 1 day | $918 | $753 – $1,102 |
Sources: BLS OEWS May 2024 (SOC 47-2181), MERIC State Cost of Living Index 95.7 for NC, NAHB Construction Cost Survey 2024.
At an effective contractor rate of $61/hour, Greensboro sits right around the national median for roofer work. Homeowners here will see lower-than-average prices on labor-intensive jobs (re-pipes, panel upgrades, full system replacements) where labor is the bulk of the cost. Materials-heavy jobs (water-heater swaps, furnace replacements, large appliance installs) will track somewhat below the national figure because regional materials inflation in NC runs about 4% below the US benchmark.
A residential roofer either performs targeted repair (lifted shingles, popped nails, failed flashing, single-leak diagnosis) or a full tear-off and replacement. A reputable contractor will start with a multi-point inspection: shingle condition (granule loss, curling, cracking), flashing integrity around chimneys/sidewalls/penetrations, ridge and soffit ventilation, attic moisture signs, and decking condition (you don't know about rotten plywood until tear-off). Asphalt shingle is the dominant material in 80% of US homes; metal and tile dominate in storm-prone or arid markets. All re-roofs require a permit and at least one mid-roof inspection by the local AHJ in most jurisdictions, and OSHA 1926.501 requires fall protection for any work at heights above 6 feet — a non-negotiable safety/insurance issue.
Door-to-door storm-chaser pitches, "we just did your neighbor's roof" without proof, asking for full payment up front, no permit pulled, or the company refusing to provide its state contractor license number.
See all Roofers in Greensboro →