LLocal ProFinder Local Costs by ZIP

Home › Providence › ZIP 02907 › HVAC

❄️ HVAC · ZIP 02907

HVAC Technician Cost — ZIP 02907 (Providence, RI)

A licensed hvac technician serving ZIP 02907 charges roughly $81/hour, anchored on BLS OEWS wage data for SOC 49-9021 ($30.30/hr national mean) and the RI cost-of-living index of 110.7.

HVAC Technician project costs near ZIP 02907

ProjectTimeTypical costRange
Diagnostic service call (no parts) 45–90 min $81 $66 – $97
Annual AC or furnace tune-up 60–90 min $148 $122 – $178
AC repair (capacitor / contactor / minor part) 1–3 hours $360 $295 – $432
Refrigerant recharge (R-410A, residential) 1–2 hours $431 $353 – $517
Smart thermostat install 1 hour $320 $262 – $384
Gas furnace replacement (80% AFUE, 80k BTU) 1 day $3,301 $2,707 – $3,961
Heat pump replacement (3-ton, 16 SEER) 1–2 days $7,548 $6,189 – $9,057
Mini-split install (single zone, 12k BTU) 1 day $2,747 $2,253 – $3,297
Whole-home duct cleaning 3–5 hours $388 $319 – $466

What a hvac technician serving 02907 actually does

A residential HVAC technician services, repairs, and installs forced-air furnaces, central AC, heat pumps, mini-splits, and ductwork. A diagnostic visit typically includes static-pressure measurement, refrigerant pressure (for cooling systems), temperature differential between supply and return, electrical-component testing (capacitor microfarad, contactor pull-in, transformer voltage), and ignition or burner inspection on heating equipment. Installations require Manual J / Manual D / Manual S calculations to size the equipment correctly — beware any installer who skips these and recommends "the same size you have now."

Six questions before you hire

  1. Are you NATE-certified, and is your company licensed and insured in this state?
  2. For a replacement: did you run a Manual J load calculation, and can I see it in writing?
  3. What SEER2/HSPF2 is the equipment you're quoting, and what's the AHRI match number?
  4. Does the quote include duct sealing, thermostat, condensate pump (if needed), and permit?
  5. What's the labor warranty, and is the manufacturer warranty registered in my name?
  6. Will you provide commissioning data (subcooling/superheat, static pressure) at completion?
"Same-size replacement" without a load calc, refrigerant-only quotes that don't address the leak, and any installer who pushes the largest unit without explaining why.
Look Up Local Repair Costs →