LLocal ProFinder Local Costs by ZIP

Home › Minneapolis › ZIP 55402 › HVAC

❄️ HVAC · ZIP 55402

HVAC Technician Cost — ZIP 55402 (Minneapolis, MN)

A licensed hvac technician serving ZIP 55402 charges roughly $68/hour, anchored on BLS OEWS wage data for SOC 49-9021 ($30.30/hr national mean) and the MN cost-of-living index of 94.1.

HVAC Technician project costs near ZIP 55402

ProjectTimeTypical costRange
Diagnostic service call (no parts) 45–90 min $68 $56 – $82
Annual AC or furnace tune-up 60–90 min $126 $103 – $151
AC repair (capacitor / contactor / minor part) 1–3 hours $306 $251 – $367
Refrigerant recharge (R-410A, residential) 1–2 hours $366 $300 – $439
Smart thermostat install 1 hour $272 $223 – $326
Gas furnace replacement (80% AFUE, 80k BTU) 1 day $2,806 $2,301 – $3,367
Heat pump replacement (3-ton, 16 SEER) 1–2 days $6,416 $5,261 – $7,699
Mini-split install (single zone, 12k BTU) 1 day $2,335 $1,915 – $2,802
Whole-home duct cleaning 3–5 hours $330 $271 – $396

What a hvac technician serving 55402 actually does

A residential HVAC technician services, repairs, and installs forced-air furnaces, central AC, heat pumps, mini-splits, and ductwork. A diagnostic visit typically includes static-pressure measurement, refrigerant pressure (for cooling systems), temperature differential between supply and return, electrical-component testing (capacitor microfarad, contactor pull-in, transformer voltage), and ignition or burner inspection on heating equipment. Installations require Manual J / Manual D / Manual S calculations to size the equipment correctly — beware any installer who skips these and recommends "the same size you have now."

Six questions before you hire

  1. Are you NATE-certified, and is your company licensed and insured in this state?
  2. For a replacement: did you run a Manual J load calculation, and can I see it in writing?
  3. What SEER2/HSPF2 is the equipment you're quoting, and what's the AHRI match number?
  4. Does the quote include duct sealing, thermostat, condensate pump (if needed), and permit?
  5. What's the labor warranty, and is the manufacturer warranty registered in my name?
  6. Will you provide commissioning data (subcooling/superheat, static pressure) at completion?
"Same-size replacement" without a load calc, refrigerant-only quotes that don't address the leak, and any installer who pushes the largest unit without explaining why.
Look Up Local Repair Costs →