LLocal ProFinder Local Costs by ZIP

Home › Fort Worth › ZIP 76104 › HVAC

❄️ HVAC · ZIP 76104

HVAC Technician Cost — ZIP 76104 (Fort Worth, TX)

A licensed hvac technician serving ZIP 76104 charges roughly $67/hour, anchored on BLS OEWS wage data for SOC 49-9021 ($30.30/hr national mean) and the TX cost-of-living index of 92.7.

HVAC Technician project costs near ZIP 76104

ProjectTimeTypical costRange
Diagnostic service call (no parts) 45–90 min $67 $55 – $81
Annual AC or furnace tune-up 60–90 min $124 $102 – $149
AC repair (capacitor / contactor / minor part) 1–3 hours $302 $247 – $362
Refrigerant recharge (R-410A, residential) 1–2 hours $361 $296 – $433
Smart thermostat install 1 hour $268 $220 – $322
Gas furnace replacement (80% AFUE, 80k BTU) 1 day $2,764 $2,267 – $3,317
Heat pump replacement (3-ton, 16 SEER) 1–2 days $6,320 $5,183 – $7,584
Mini-split install (single zone, 12k BTU) 1 day $2,301 $1,886 – $2,761
Whole-home duct cleaning 3–5 hours $325 $267 – $390

What a hvac technician serving 76104 actually does

A residential HVAC technician services, repairs, and installs forced-air furnaces, central AC, heat pumps, mini-splits, and ductwork. A diagnostic visit typically includes static-pressure measurement, refrigerant pressure (for cooling systems), temperature differential between supply and return, electrical-component testing (capacitor microfarad, contactor pull-in, transformer voltage), and ignition or burner inspection on heating equipment. Installations require Manual J / Manual D / Manual S calculations to size the equipment correctly — beware any installer who skips these and recommends "the same size you have now."

Six questions before you hire

  1. Are you NATE-certified, and is your company licensed and insured in this state?
  2. For a replacement: did you run a Manual J load calculation, and can I see it in writing?
  3. What SEER2/HSPF2 is the equipment you're quoting, and what's the AHRI match number?
  4. Does the quote include duct sealing, thermostat, condensate pump (if needed), and permit?
  5. What's the labor warranty, and is the manufacturer warranty registered in my name?
  6. Will you provide commissioning data (subcooling/superheat, static pressure) at completion?
"Same-size replacement" without a load calc, refrigerant-only quotes that don't address the leak, and any installer who pushes the largest unit without explaining why.
Look Up Local Repair Costs →