LLocal ProFinder Local Costs by ZIP

Home › Salt Lake City › ZIP 84138 › HVAC

❄️ HVAC · ZIP 84138

HVAC Technician Cost — ZIP 84138 (Salt Lake City, UT)

A licensed hvac technician serving ZIP 84138 charges roughly $75/hour, anchored on BLS OEWS wage data for SOC 49-9021 ($30.30/hr national mean) and the UT cost-of-living index of 103.2.

HVAC Technician project costs near ZIP 84138

ProjectTimeTypical costRange
Diagnostic service call (no parts) 45–90 min $75 $62 – $90
Annual AC or furnace tune-up 60–90 min $138 $113 – $166
AC repair (capacitor / contactor / minor part) 1–3 hours $336 $275 – $403
Refrigerant recharge (R-410A, residential) 1–2 hours $402 $329 – $482
Smart thermostat install 1 hour $298 $245 – $358
Gas furnace replacement (80% AFUE, 80k BTU) 1 day $3,077 $2,523 – $3,693
Heat pump replacement (3-ton, 16 SEER) 1–2 days $7,036 $5,770 – $8,444
Mini-split install (single zone, 12k BTU) 1 day $2,561 $2,100 – $3,073
Whole-home duct cleaning 3–5 hours $362 $297 – $435

What a hvac technician serving 84138 actually does

A residential HVAC technician services, repairs, and installs forced-air furnaces, central AC, heat pumps, mini-splits, and ductwork. A diagnostic visit typically includes static-pressure measurement, refrigerant pressure (for cooling systems), temperature differential between supply and return, electrical-component testing (capacitor microfarad, contactor pull-in, transformer voltage), and ignition or burner inspection on heating equipment. Installations require Manual J / Manual D / Manual S calculations to size the equipment correctly — beware any installer who skips these and recommends "the same size you have now."

Six questions before you hire

  1. Are you NATE-certified, and is your company licensed and insured in this state?
  2. For a replacement: did you run a Manual J load calculation, and can I see it in writing?
  3. What SEER2/HSPF2 is the equipment you're quoting, and what's the AHRI match number?
  4. Does the quote include duct sealing, thermostat, condensate pump (if needed), and permit?
  5. What's the labor warranty, and is the manufacturer warranty registered in my name?
  6. Will you provide commissioning data (subcooling/superheat, static pressure) at completion?
"Same-size replacement" without a load calc, refrigerant-only quotes that don't address the leak, and any installer who pushes the largest unit without explaining why.
Look Up Local Repair Costs →